KVM 100 series ac drive based on the industrial application requirements of high stability, small size and easy debugging, we are providing a new generation of compact inverters.
| Item | Description |
|---|---|
| Rated voltage, frequency | three phase: 380V-440V,50Hz/60Hz; single phase: 200V-240V,50Hz/60Hz |
| Voltage operating range | three phase: 380V-440V,50Hz/60Hz single phase: 200V-240V,50Hz/60Hz, Voltage unbalance rate:<3%; frequency:±5% |
| Voltage | 0-rated input voltage |
| Frequency | 0Hz-1000Hz |
| Overload capacity | 150% rated current 60s, 180% rated current 2s |
| Control mode | V/F/SVC |
| Modulation mode | Space vector PMW modulation |
| Motor type | asynchronous motor, synchronous motor, single motor(Please consult the manufacturer when using) |
| Start torque | 0.5Hz/150% rated torque |
| Speed adjusting range | 1:100(speed sensorless) |
| Frequency accuracy | digital setting: max. frequency ±0.01%; analog setting: max. frequency ±1% |
| Frequency resolution | digital setting: max. frequency ±0.01%; analog setting: max. frequency ±1% |
| Current limiting | Automatic current limitation during operation to prevent frequent over current fault tripping |
| Acceleration and deceleration curve | line/S-curve |
| Instant power down | Support instant stop non-stop,1:100(speed sensorless) |
| Command source | keypad, terminal, communication |
| Setting value source | digital, analog, multi-step speed, communication |
| PID | support main setting+PID |
| Protection function | over current, over voltage, under voltage, over heat, over load, phase loss, earth leakage, output short circuit protection, etc |
| Communication | MODBUS RTU |
| Digital tube display | output frequency, output current, output voltage, has voltage, dispalyed value 1, displayed value 2, Current alarm, current fault |
| External keypad | support |
| Applicable place | indoor, no direct sunlight, no dust, corrosive gas, combustible gas, oil mist, water vapor, water drop or -salt, etc |
| Altitude | derating use if above 1000m, derating 10% for every 1000m increase. |
| Environment temperature | -10°C ~+40°C (derating use if environment temperature is 40°C ~ 50°C ) |
| Humidity | 5%-90% RH, non-condensation |
| Store temperature | -40°C ~ +70°C |
| Vibration | less than 5.9m/s(0.6g) |
