KVM 200 series ac drive meet economic demands by simple speed control and stable performance. This KVM 200 AC Drive is very compact size, which can adapt to the harsh environment better with a variety of protective design.
| Item | Description |
|---|---|
| Input power supply | 380Vpower: 330～440; 220Vpower: 170～240 |
| Control mode | SVPM |
| Five-bit digital tube displays the status | Display frequency, current, speed, voltage, PID， temperature, forward and reverse state, fault and so on. |
| Operating temperature | -10～50℃ |
| Humidity | 0～95% Relative humidity(non-condensation) |
| Vibration | Under 0.5G |
| frequency control range | 0.10-800.0Hz |
| frequency Accuracy | Digital：0.1%（-10～50℃）, Analogue：0.1%（25℃） |
| Set resolution | Digital：0.1Hz； Analogue：1% of the maximum Operating frequency |
| Output resolution | 0.10-800.0Hz |
| Keyboard setting method | Encoder setting |
| Simulation setting method | External voltage 0-5V，0-10V |
| Other functions | The lower frequency limit, starting frequency, stopping frequency |
| Acceleration and deceleration control | The acceleration and deceleration time(0.5-6500seconds) can be selected arbitrarily |
| V/F curve | The V/F curve can be set arbitrarily |
| Torque control | Torque boost can be set, and the maximum 100% of starting torque can reach 150% at 1.0Hz. |
| Digital input | 6 multi-functional digital input terminals, forward and reverse running, forward and reverse jog, UP/DOWN function, counter, external emergency stop and other functions. |
| Analog input | 2 multifunctional digital input ports: Input voltage range: 0V～10V Input impedance: 22kΩ |
| Digital output | 2 multi-functional digital output terminals, indications and alarms during operation, frequency, external abnormality, program operation, etc. |
| Analog output | 2 multifunctional digital output ports: Output voltage range: 0V～10V Output current range: 0mA～20mA |
| Other functions | Automatic voltage regulation (AVR),deceleration stop or free stop, DC brake, carrier adjustable, up to 10 KHz,etc. |
| Overload protection | Electronic relay protects the AC drive(constant torque 150% per minute, fan 120% per minute). |
| FUSE protection | The motor stops when FUSE fusing. |
| Overvoltage | 220V line：DC voltage >400V; 380V line：DC voltage >800V |
| Insufficient voltage | 220V line：DC voltage <200V; 380V line：DC voltage <400V |
| Stall Prevention | Stall prevention in acceleration and deceleration |
| Output short circuit | Electronic circuit protection |
| Other functions | Overheat protection of heat sink, reversal limit, direct startup after starting the machine, fault reset function, parameter locking, etc. |
